Specify Inspections module settings
If your agency or department purchased the Inspections module, you can configure department-specific information in the Admin module for performing inspections, such as the code sets used, the checklists the inspectors use, and the types of inspections performed.
An inspection is an organized examination or formal evaluation of a property, building, or occupant. The results are compared to specified requirements and standards (codes) for determining whether the inspected entity complies with these requirements and standards.
Codes are the foundational building blocks of the Inspections module. Each code is an item that inspectors check during an inspection, to determine if a property, building, or occupant meets the requirements of the code or if there is a violation. To logically organize the codes, you can group related codes into code sets.
An inspection checklist is a list of codes that an inspector uses while inspecting a property, building, or occupant. The inspector verifies each item on the checklist to make sure that no codes are missed while performing the inspection.
An inspection type is a collection of one or more related checklists that an inspector uses when performing an inspection. In the Properties module, you must select an inspection type when you schedule an inspection, to indicate what type of inspection will be performed.
Add codes and code sets to the Inspections module
Create checklists for the Inspections module